Complete production lines for transformerboard manufacturing
- Multi-opening hot press (12 – 20 openings)
- Loading and unloading of the hot press
- Trimming of boards before pressing
- Return of defective boards to the production process
- Primary and secondary heating circuits
- End-of-line processing (sawing, finishing, storage, etc.)
- Laminating press
Technical specifications of the multi opening press
- Number of openings: 12 – 20
- Pressing force: 40,000 kN, 52,000 kN, 80,000 kN, customer-specific solutions available
- Heated platen size: 4,625 x 2,510 mm, 4,540 x 3,560 mm, 6,540 x 3,560 mm, customer-specific solutions available
- Heating system: Hot water, thermal oil, steam
Your Benefits
Maximum process reliability, thanks to simultaneous closing and identical process parameters across all press openings
Rapid dewatering of the boards through drainage holes, including nozzles within the heating platens
Quality assurance through automatic control of each board and removal of defective boards
Optimized setup times and maximum system availability through fast changeover of heated platens using the loading and unloading device
Gentle processing and consistent surface quality, as a mesh belt prevents direct contact between the heated platen and the board
Increased output rate through simultaneous loading and unloading of the hot press
Short cycle times, enabled by fast opening and closing of the press
Option: High‑speed doors at the front and rear, combined with an efficient extraction system, ensure a homogeneous and stable atmosphere inside the press, resulting in reproducible product quality
Technical specifications of the laminating press
- Specific pressure: 200 N/cm2
- Pressing speed: controlled by recipe
- Daylight opening: 1,000 mm
- Press platen dimensions: 3,250 x 4,300 mm
- Hydraulic working pressure: 300 bar
- Height of press loading: 900 mm
